DDAN Hood Cleaning and Repair
Professional Restaurant Fan & Hood Installation in Springfield
From historic square retrofits to Highway 431 franchise build-outs — permitted, installed, and inspected. Free on-site estimates.
Licensed, Bonded & Insured • NFPA 96 Compliant • Since 2006
Planning a new kitchen or upgrading your exhaust system? We do free on-site surveys to spec exactly what you need.
FREE ON-SITE SURVEY
No Obligation Estimate
Complete Installation Services for Springfield Kitchens
Exhaust Fan Installation for Springfield Restaurants
Whether you're replacing a burned-out fan or upgrading to a higher-CFM unit, we handle sizing, wiring, mounting, and code compliance.
New Fan Installation
Complete install on new or replacement rooftop upblast fans. Includes roof curb, hinge kit, wiring, and startup testing. Direct drive and belt drive configurations available.
Fan Replacement & Upgrade
Swap undersized or failed fans with properly rated units. We calculate CFM requirements based on your hood size and cooking volume to spec the right replacement.
Fan Accessories
Hinge kits, speed controllers, disconnect switches, motor covers, and grease cups installed with every fan. Every accessory is NFPA 96 compliant.
Our Fan Installation Process
Site Survey
We measure your hood, ductwork, and rooftop access. Calculate CFM requirements for your cooking volume.
Spec & Source
We spec the right fan for your system and source from our supplier network. Most common sizes in stock locally.
Install & Test
Licensed installation with hinge kit, wiring, and startup testing. Full written service documentation for your records.
Springfield's growing fast-food corridor along Highway 431 pushes exhaust fan motors and belts to their limits during high-volume lunch rushes. Meanwhile, older restaurants on the historic Robertson County square often have aging upblast fans that lack hinge kits entirely, leading to roof damage every time a technician services them. We've installed and replaced fans in both environments — from brand-new franchise outparcels to century-old downtown buildings that need custom curb adapters to accept modern equipment.
Need to browse specific fan models and parts? See our exhaust fan parts catalog for Springfield.
Complete Kitchen Exhaust System Installation in Springfield
Turnkey builds for new restaurants, renovations, and kitchen expansions. Hood, ductwork, fan, fire suppression — one contractor, one warranty.
- Type I or Type II exhaust hood canopy (custom-sized)
- Grease ductwork with fire-rated access panels
- Rooftop upblast exhaust fan with hinge kit
- Electrical wiring and disconnect
- Startup testing and airflow balancing
- UL 300 fire suppression system (coordinated)
- Make-up air integration
- Code-compliant grease containment
- Permit coordination with Springfield Fire Department
- Full documentation package for inspectors
Typical Timeline
3-7 business days depending on system size, duct run complexity, and building access. Single fan installs are often same-day.
What We Coordinate
We work with your general contractor, electrician, and fire suppression sub. One point of contact for the exhaust scope.
Springfield Permits
We handle Robertson County permit applications and schedule the final inspection with the Springfield Fire Department.
The Springfield Fire Department rigidly enforces fire codes, particularly for the historic preservation zone around the downtown square. Retrofitting modern NFPA 96-compliant exhaust systems into 19th-century buildings requires custom duct runs routed through concealed chases, strategic access panel placement, and careful roof penetrations that don't compromise the structure. On the Highway 431 corridor, newer franchise builds need properly rated systems from day one — we spec for the actual cooking volume, not just the minimum code requirement, so your equipment lasts.
Browse individual system components in our parts catalog for Springfield.
Make-Up Air Unit Installation for Springfield Kitchens
Your exhaust system can't function without balanced airflow. When MUA fails, doors slam, gas appliances backdraft, and fans lose efficiency.
Gas-Fired Heated MUA
Required for Tennessee winters. Direct gas-fired heating prevents freezing drafts and dangerous negative pressure. Properly sized units maintain comfortable kitchen temperatures year-round.
Untempered / Passive MUA
Budget fresh air supply for mild seasons and supplemental use. Belt or direct drive options. Effective when heating isn't required but airflow balance is still critical.
MUA Retrofit & Replacement
Upgrading undersized or failed units. We calculate CFM balance between your exhaust and make-up air to eliminate negative pressure and bring your system up to current code.
Why Make-Up Air Matters
Supporting Installation Services in Springfield
The components that keep your whole system code-compliant and inspection-ready.
Access Panel Installation
NFPA 96 requires fire-rated access panels every 12 feet of horizontal duct and at every change of direction. We install code-compliant panels in all duct types.
Learn more →Grease Containment Systems
Rooftop grease boxes, containment trays, absorbent pads, and 360° grease gutters. Protect your roof and pass inspection.
Learn more →Ductwork Modifications
New duct runs, extensions, transitions, and repairs. Fire-rated construction with proper grading for grease drainage.
Electrical & Controls
Disconnect switches, speed controllers, VFDs, and wiring for exhaust and MUA systems. All work meets NEC and local electrical codes.
Trusted by restaurants, churches, schools, and institutions across Middle Tennessee since 2006.
Who We Serve
Restaurant Owners & Managers
Opening a new restaurant, renovating your kitchen, or expanding your cooking line? We handle the full exhaust installation — permitted, inspected, documented. Need exhaust system repair instead?
(615) 881-6968 →General Contractors & Kitchen Consultants
Need a licensed exhaust subcontractor for a commercial kitchen build-out? We coordinate with your team, pull our scope, and deliver turnkey exhaust systems on schedule. Browse our parts catalog.
Contractor Line: (615) 881-6968 →Why Springfield Restaurants Choose DDAN for Installation
Historic Square: Precision Retrofit Installations
The Springfield square is ringed with 19th-century buildings that were never designed for modern commercial cooking. Retrofitting NFPA 96-compliant exhaust systems into these structures demands custom duct fabrication routed through concealed wall chases, strategic fire-rated access panel placement to avoid damaging historic finishes, and careful roof penetrations for upblast fans. We've brought multiple restaurants on and around the square fully up to modern code without compromising the building's character.
Highway 431 Corridor: Built for Volume
The fast-food and franchise corridor along Highway 431 near NorthCrest Medical Center is expanding rapidly. New franchise build-outs here need exhaust systems specced for relentless, high-volume cooking — not minimum-code installs that fail within a year. We size every fan, duct run, and grease containment system for the actual cooking output, ensuring your equipment lasts and your Springfield Fire Department inspections pass on the first visit.
Memorial Blvd & Beyond: Serving All of Robertson County
From the diners and cafes along Memorial Blvd to the industrial parks and institutional kitchens outside the city center, we install exhaust systems for every type of Springfield commercial kitchen. Whether you're feeding a manufacturing workforce during the lunch rush or running a family restaurant on the weekend, we build systems that handle the demand.
Springfield Commercial Kitchen Compliance
The Springfield Fire Department enforces NFPA 96 for all commercial kitchen exhaust systems. Every installation must include proper hinge kits on upblast fans, fire-rated access panels on ductwork, code-compliant grease containment, and properly sized make-up air. Inspectors are particularly strict regarding historic preservation codes on the downtown square. Our installations are built to pass on the first inspection.
Springfield Water & Wastewater monitors the local system tightly. Property owners face severe penalties if rooftop grease leaks into the storm drain system. We install grease containment from the start so you're compliant on both fire and environmental codes before you open.
Learn more about NFPA 96 standards and what they mean for your kitchen.
Springfield Installation Service Area
We install exhaust systems across Springfield and all surrounding communities. Free on-site estimates for every project.
Frequently Asked Questions — Springfield Installation
What permits does the Robertson County building department require for exhaust system installation in Springfield?
Commercial kitchen exhaust installations in Springfield require mechanical permits through Robertson County. We handle the entire permit process, coordinate with the Springfield Fire Department for the final walkthrough, and ensure your system meets all NFPA 96 requirements before the inspector arrives.
Can you install a modern exhaust system inside one of the historic buildings on the Springfield square?
Yes — retrofit installations in Springfield's 19th-century downtown buildings are one of our specialties. These older structures often have concealed, non-standard duct chases and limited roof access. We design custom duct runs, fabricate adapters on-site, and install fire-rated access panels without compromising the building's historic character.
How much does it cost to install a commercial exhaust fan at a Springfield restaurant?
A single rooftop upblast fan replacement with hinge kit, curb adapter, and wiring typically runs $1,500-$4,000 installed. A full turnkey system — hood, ductwork, fan, make-up air, and fire suppression coordination — ranges from $15,000-$50,000+ depending on kitchen size and cooking volume. We provide free on-site estimates with line-item quotes.
How quickly can DDAN complete a fan installation for a new franchise opening on Highway 431?
Single fan installations on newer Highway 431 strip centers are typically same-day or next-day since roof access and electrical infrastructure are straightforward. Complete system installs for new franchise build-outs take 3 to 7 business days. We schedule around your opening timeline so construction stays on track.
Does DDAN install grease containment as part of a new exhaust system in Springfield?
Absolutely. Every installation includes rooftop grease containment — boxes, trays, and absorbent pads — sized for your cooking volume. Springfield Water & Wastewater enforces strict F.O.G. regulations, and property owners face severe penalties if grease reaches the storm drain system. We build compliance in from day one.
Don't Wait Until You're Fined or Shut Down!
Whether you need a single fan replacement on Highway 431, a complete exhaust system for your new Springfield restaurant, or a make-up air retrofit for a historic building on the square, DDAN Hood Cleaning and Repair is here to get your kitchen up and running.
Call Now: (615) 881-6968
