DDAN Hood Cleaning and Repair
Professional Restaurant Fan & Hood Installation in Dickson
From I-40 franchise build-outs to historic downtown retrofits — permitted, installed, and inspected. Free on-site estimates.
Licensed, Bonded & Insured • NFPA 96 Compliant • Since 2006
Planning a new kitchen or upgrading your exhaust system? We do free on-site surveys to spec exactly what you need.
FREE ON-SITE SURVEY
No Obligation Estimate
Complete Installation Services for Dickson Kitchens
Exhaust Fan Installation for Dickson Restaurants
Whether you're replacing a burned-out fan or upgrading to a higher-CFM unit, we handle sizing, wiring, mounting, and code compliance.
New Fan Installation
Complete install on new or replacement rooftop upblast fans. Includes roof curb, hinge kit, wiring, and startup testing. Direct drive and belt drive configurations available.
Fan Replacement & Upgrade
Swap undersized or failed fans with properly rated units. We calculate CFM requirements based on your hood size and cooking volume to spec the right replacement.
Fan Accessories
Hinge kits, speed controllers, disconnect switches, motor covers, and grease cups installed with every fan. Every accessory is NFPA 96 compliant.
Our Fan Installation Process
Site Survey
We measure your hood, ductwork, and rooftop access. Calculate CFM requirements for your cooking volume.
Spec & Source
We spec the right fan for your system and source from our supplier network. Most common sizes in stock locally.
Install & Test
Licensed installation with hinge kit, wiring, and startup testing. Full written service documentation for your records.
Dickson's I-40 corridor drives relentless traffic through the Highway 46 restaurant strip, pushing exhaust fans past their intended duty cycles. The continuous interstate volume means fryers are running non-stop, which tears through standard OEM fan belts and overheats factory motors. We install heavy-duty, commercial-grade belt-drive and direct-drive upblast fans rated for the actual cooking output these high-volume kitchens demand — not the bare minimum that fails within months.
Need to browse specific fan models and parts? See our exhaust fan parts catalog for Dickson.
Complete Kitchen Exhaust System Installation in Dickson
Turnkey builds for new restaurants, renovations, and kitchen expansions. Hood, ductwork, fan, fire suppression — one contractor, one warranty.
- Type I or Type II exhaust hood canopy (custom-sized)
- Grease ductwork with fire-rated access panels
- Rooftop upblast exhaust fan with hinge kit
- Electrical wiring and disconnect
- Startup testing and airflow balancing
- UL 300 fire suppression system (coordinated)
- Make-up air integration
- Code-compliant grease containment
- Permit coordination with Dickson Fire Department
- Full documentation package for inspectors
Typical Timeline
3-7 business days depending on system size, duct run complexity, and building access. Single fan installs are often same-day.
What We Coordinate
We work with your general contractor, electrician, and fire suppression sub. One point of contact for the exhaust scope.
Dickson Permits
We handle Dickson County permit applications and schedule the final inspection with the Dickson Fire Department.
The Dickson Fire Department strictly enforces NFPA 96 across the high-traffic Highway 46 corridor, meaning every system we install includes proper hinge kits, fire-rated access panels at every change of direction, and rooftop grease containment. Downtown Dickson's older buildings present unique challenges — concealed ductwork, modified bitumen roofing, and limited electrical panels — but we've retrofitted modern compliant systems into structures throughout Dickson County without compromising the building envelope.
Browse individual system components in our parts catalog for Dickson.
Make-Up Air Unit Installation for Dickson Kitchens
Your exhaust system can't function without balanced airflow. When MUA fails, doors slam, gas appliances backdraft, and fans lose efficiency.
Gas-Fired Heated MUA
Required for Tennessee winters. Direct gas-fired heating prevents freezing drafts and dangerous negative pressure. Properly sized units maintain comfortable kitchen temperatures year-round.
Untempered / Passive MUA
Budget fresh air supply for mild seasons and supplemental use. Belt or direct drive options. Effective when heating isn't required but airflow balance is still critical.
MUA Retrofit & Replacement
Upgrading undersized or failed units. We calculate CFM balance between your exhaust and make-up air to eliminate negative pressure and bring your system up to current code.
Why Make-Up Air Matters
See our make-up air unit options for Dickson.
Supporting Installation Services in Dickson
The components that keep your whole system code-compliant and inspection-ready.
Access Panel Installation
NFPA 96 requires fire-rated access panels every 12 feet of horizontal duct and at every change of direction. We install code-compliant panels in all duct types.
Learn more →Grease Containment Systems
Rooftop grease boxes, containment trays, absorbent pads, and 360° grease gutters. Protect your roof and pass inspection.
Learn more →Ductwork Modifications
New duct runs, extensions, transitions, and repairs. Fire-rated construction with proper grading for grease drainage.
Electrical & Controls
Disconnect switches, speed controllers, VFDs, and wiring for exhaust and MUA systems. All work meets NEC and local electrical codes.
Trusted by restaurants, churches, schools, and institutions across Middle Tennessee since 2006.
Who We Serve
Restaurant Owners & Managers
Opening a new restaurant, renovating your kitchen, or expanding your cooking line? We handle the full exhaust installation — permitted, inspected, documented. Need exhaust system repair instead?
(615) 881-6968 →General Contractors & Kitchen Consultants
Need a licensed exhaust subcontractor for a commercial kitchen build-out? We coordinate with your team, pull our scope, and deliver turnkey exhaust systems on schedule. Browse our parts catalog.
Contractor Line: (615) 881-6968 →Why Dickson Restaurants Choose DDAN for Installation
Highway 46 & I-40: Built for Interstate Volume
The Highway 46 franchise corridor absorbs massive traffic from I-40, generating relentless demand on commercial kitchen exhaust systems. Standard builder-grade installs fail fast here. We spec every fan, duct run, and grease containment system for the actual cooking output — heavy-duty motors rated for continuous operation, commercial-grade belts that won't snap under high heat, and containment systems that capture the extreme grease loads these kitchens produce.
Downtown Dickson: Historic Building Retrofits
Dickson's revitalized historic downtown is attracting new restaurant concepts, but these older buildings weren't designed for modern commercial cooking. Non-standard duct chases, older modified bitumen roofing, and limited electrical capacity all require careful planning. We design custom duct runs, fabricate curb adapters on-site, and install fire-rated access panels so the system is code-compliant without compromising the building.
TriStar Horizon & Industrial District: Institutional Kitchens
The institutional kitchens and cafeterias serving Dickson's industrial parks and the TriStar Horizon Medical Center area require robust exhaust systems built for consistent daily volume. These aren't peak-and-valley restaurant operations — they run steady all day. We install systems balanced for sustained airflow and pair them with properly sized make-up air to maintain comfort and code compliance.
Dickson Commercial Kitchen Compliance
The Dickson Fire Department enforces NFPA 96 for all commercial kitchen exhaust systems, with particular focus on the high-traffic Highway 46 corridor where grease fire risks are elevated due to rapid-turnover cooking. Every installation must include proper hinge kits on upblast fans, fire-rated access panels on ductwork, code-compliant grease containment, and properly sized make-up air. Our installations are built to pass on the first inspection.
Dickson Water Authority actively monitors grease traps and interceptors to protect the municipal infrastructure from heavy F.O.G. runoff. We install grease containment from the start so you're compliant on both fire and environmental codes before you open.
Learn more about NFPA 96 standards and what they mean for your kitchen.
Dickson Installation Service Area
We install exhaust systems across Dickson and all surrounding communities. Free on-site estimates for every project.
Frequently Asked Questions — Dickson Installation
How long does it take to install a complete exhaust system for a new Dickson restaurant near I-40?
A full turnkey installation — hood, ductwork, rooftop fan, make-up air, and fire suppression coordination — typically takes 4 to 7 business days for a standard highway franchise build-out. We schedule around your construction timeline and coordinate with your GC so the exhaust scope doesn't hold up your opening.
Does DDAN pull permits for exhaust system installations in Dickson County?
Yes. We handle all mechanical permit applications through Dickson County and coordinate the final fire code inspection with the Dickson Fire Department. Our installations are built to pass NFPA 96 inspection on the first walkthrough — hinge kits, fire-rated access panels, grease containment, and full documentation included.
Can you retrofit a modern exhaust system into an older downtown Dickson building?
Absolutely. Historic downtown Dickson buildings often have concealed ductwork, non-standard roof penetrations, and limited electrical capacity. We assess every constraint during our free site survey, design custom duct runs, fabricate adapters on-site, and install fire-rated access panels so your system is fully NFPA 96 compliant without damaging the structure.
What size exhaust fan does my Dickson restaurant need?
Fan sizing depends on your hood dimensions, cooking volume, duct run length, and whether you have a Type I or Type II hood. We perform a free on-site CFM calculation to spec the exact fan your system needs — undersized fans create code violations and fire hazards, while oversized fans waste energy and create negative pressure.
Why do the Dickson Water Authority F.O.G. regulations matter for my exhaust installation?
The Dickson Water Authority strictly monitors fats, oils, and grease entering the municipal wastewater system. Grease leaking from your rooftop fan onto the roof and into storm drains can trigger severe fines. We build grease containment into every installation from day one — boxes, trays, and absorbent pads sized for your cooking volume.
Don't Wait Until You're Fined or Shut Down!
Whether you need an emergency fan replacement off I-40, a complete exhaust system build-out for a new Dickson franchise, or a make-up air retrofit for a historic downtown building, DDAN Hood Cleaning and Repair is here to get your kitchen up and running.
Call Now: (615) 881-6968
