DDAN Hood Cleaning and Repair
Restaurant Fan & Hood Installation in Clarksville, TN
From Fort Campbell corridor franchises to APSU campus restaurants — permitted, installed, and inspected. Free on-site estimates.
Licensed, Bonded & Insured • NFPA 96 Compliant • Since 2006
Planning a new kitchen or upgrading your exhaust system? We do free on-site surveys to spec exactly what you need.
FREE ON-SITE SURVEY
No Obligation Estimate
Complete Installation Services for Clarksville Kitchens
Kitchen Exhaust Fan Installation for Clarksville Restaurants
Whether you're replacing a burned-out fan or upgrading to a higher-CFM unit, our restaurant hood installation service covers sizing, wiring, mounting, and code compliance.
New Fan Installation
Complete install on new or replacement rooftop upblast fans. Includes roof curb, hinge kit, wiring, and startup testing. Direct drive and belt drive configurations available.
Fan Replacement & Upgrade
Swap undersized or failed fans with properly rated units. We calculate CFM requirements based on your hood size and cooking volume to spec the right replacement.
Fan Accessories
Hinge kits, speed controllers, disconnect switches, motor covers, and grease cups installed with every fan. Every accessory is NFPA 96 compliant.
Our Fan Installation Process
Site Survey
We measure your hood, ductwork, and rooftop access. Calculate CFM requirements for your cooking volume.
Spec & Source
We spec the right fan for your system and source from our supplier network. Most common sizes in stock locally.
Install & Test
Licensed installation with hinge kit, wiring, and startup testing. Full written service documentation for your records.
Clarksville's quick-service restaurants along Wilma Rudolph Blvd and Fort Campbell Blvd run their exhaust fans non-stop to serve the massive military and college populations. The sheer volume of output — fryers running 14+ hours, grills firing continuously — rapidly stretches fan belts and burns out motors. Many older establishments near Austin Peay State University have undersized fans that were never properly rated for their actual cooking volume. We install properly specified direct-drive and belt-drive units with sealed motor compartments designed to handle Clarksville's relentless pace.
Need to browse specific fan models and parts? See our exhaust fan parts catalog for Clarksville.
Complete Kitchen Exhaust System Installation in Clarksville
Turnkey builds for new restaurants, renovations, and kitchen expansions. Hood, ductwork, fan, fire suppression — one contractor, one warranty.
- Type I or Type II exhaust hood canopy (custom-sized)
- Grease ductwork with fire-rated access panels
- Rooftop upblast exhaust fan with hinge kit
- Electrical wiring and disconnect
- Startup testing and airflow balancing
- UL 300 fire suppression system (coordinated)
- Make-up air integration
- Code-compliant grease containment
- Permit coordination with Clarksville Fire Rescue
- Full documentation package for inspectors
Typical Timeline
3-7 business days depending on system size, duct run complexity, and building access. Single fan installs are often same-day.
What We Coordinate
We work with your general contractor, electrician, and fire suppression sub. One point of contact for the exhaust scope.
Clarksville Permits
We handle Montgomery County permit applications and schedule the final inspection with Clarksville Fire Rescue's Fire Prevention Bureau.
Clarksville Fire Rescue's Fire Prevention Bureau maintains strict enforcement standards, particularly regarding fire suppression link replacements and cleaning schedules in the high-density franchise corridors along Wilma Rudolph Blvd. New construction on TPO-roofed outparcel developments requires meticulous grease containment from day one — a single grease leak can void the roof membrane warranty. We've installed complete exhaust systems in multi-unit franchise build-outs, standalone restaurants near Fort Campbell, and campus-adjacent eateries near APSU. Every install includes full documentation for both fire inspection and landlord compliance.
Browse individual system components in our parts catalog for Clarksville.
Make-Up Air Unit Installation for Clarksville Kitchens
Your exhaust system can't function without balanced airflow. When MUA fails, doors slam, gas appliances backdraft, and fans lose efficiency.
Gas-Fired Heated MUA
Required for Tennessee winters. Direct gas-fired heating prevents freezing drafts and dangerous negative pressure. Properly sized units maintain comfortable kitchen temperatures year-round.
Untempered / Passive MUA
Budget fresh air supply for mild seasons and supplemental use. Belt or direct drive options. Effective when heating isn't required but airflow balance is still critical.
MUA Retrofit & Replacement
Upgrading undersized or failed units. We calculate CFM balance between your exhaust and make-up air to eliminate negative pressure and bring your system up to current code.
Why Make-Up Air Matters
Supporting Installation Services in Clarksville
The components that keep your whole system code-compliant and inspection-ready.
Access Panel Installation
NFPA 96 requires fire-rated access panels every 12 feet of horizontal duct and at every change of direction. We install code-compliant panels in all duct types.
Learn more →Grease Containment Systems
Rooftop grease boxes, containment trays, absorbent pads, and 360° grease gutters. Protect your roof and pass inspection.
Learn more →Ductwork Modifications
New duct runs, extensions, transitions, and repairs. Fire-rated construction with proper grading for grease drainage.
Electrical & Controls
Disconnect switches, speed controllers, VFDs, and wiring for exhaust and MUA systems. All work meets NEC and local electrical codes.
Trusted by restaurants, churches, schools, and institutions across Middle Tennessee since 2006.
Who We Serve
Restaurant Owners & Managers
Opening a new restaurant, renovating your kitchen, or expanding your cooking line? We handle the full exhaust installation — permitted, inspected, documented. Need a repair instead?
(615) 881-6968 →General Contractors & Kitchen Consultants
Need a licensed exhaust subcontractor for a commercial kitchen build-out? We coordinate with your team, pull our scope, and deliver turnkey exhaust systems on schedule. Browse our parts catalog.
Contractor Line: (615) 881-6968 →Why Clarksville Restaurants Choose DDAN for Installation
Wilma Rudolph Blvd: Franchise Corridor Builds
Wilma Rudolph Blvd is Clarksville's busiest commercial corridor, packed with franchise restaurants and fast-casual chains that serve Fort Campbell personnel and their families. These high-volume kitchens demand oversized exhaust fans, heavy-duty ductwork, and fire suppression systems rated for continuous operation. We've installed complete turnkey systems in multiple franchise build-outs along this corridor — including multi-unit projects where schedule coordination is critical.
Fort Campbell Blvd: Military-Town Volume
Restaurants along Fort Campbell Blvd serve one of the largest military installations in the country. Service calls spike during military deployment returns and major training events when dining volume surges overnight. We install systems built to handle these extreme peaks — proper CFM calculations, industrial grease containment, and make-up air designed for kitchens that go from idle to maximum capacity in hours.
APSU Campus & Historic Downtown: Mixed-Use Installs
The growing restaurant scene near Austin Peay State University and historic downtown Clarksville brings a mix of new construction and retrofits. Older buildings near campus often have degraded grease containment and undersized fans. We assess every retrofit constraint during our free site survey and design systems that fit the building while meeting current NFPA 96 standards.
Clarksville Commercial Kitchen Compliance
The Clarksville Fire Rescue Fire Prevention Bureau enforces NFPA 96 for all commercial kitchen exhaust systems, with strict focus on fire suppression link replacements and cleaning schedules in high-density franchise corridors. Every installation must include proper hinge kits on upblast fans, fire-rated access panels on ductwork, code-compliant grease containment, and properly sized make-up air. Our installations are built to pass on the first inspection.
Clarksville Gas & Water enforces strict grease trap and wastewater regulations. Rooftop grease runoff that reaches the storm drains can result in fines. We install complete grease containment from the start so you're compliant on both fire and environmental codes before you open.
Learn more about NFPA 96 standards and what they mean for your kitchen.
Clarksville Installation Service Area
We install exhaust systems across Clarksville and all surrounding communities. Free on-site estimates for every project.
Frequently Asked Questions — Clarksville Installation
How quickly can you start a kitchen exhaust installation in Clarksville?
Most projects begin within 1-2 weeks of the site survey. Emergency fan replacements for restaurants on Wilma Rudolph Blvd or Fort Campbell Blvd are often same-day or next-day. We carry common upblast fan sizes in stock and can source specialty units quickly through our supplier network.
Does Clarksville Fire Rescue require inspections for exhaust system installations?
Yes. The Clarksville Fire Rescue Fire Prevention Bureau inspects all commercial kitchen exhaust installations for NFPA 96 compliance. They pay close attention to fire suppression link replacements and cleaning schedules in high-density franchise corridors. We coordinate all permit applications and schedule your final inspection directly.
Can you install exhaust systems for restaurants near Fort Campbell?
Absolutely. We frequently install systems in the high-volume restaurants along Fort Campbell Blvd that serve military personnel. These kitchens run extended hours and need oversized fans, reinforced ductwork, and heavy-duty grease containment. We understand the pace and volume that military-town dining demands.
What exhaust fan size do most Clarksville quick-service restaurants need?
Most QSR locations along Wilma Rudolph Blvd need upblast fans rated between 2,000-5,000 CFM depending on hood size and cooking volume. We calculate the exact CFM requirement during our free site survey based on your hood dimensions, cooking equipment, and duct run length. Undersized fans are the most common code violation we see in Clarksville.
Do you handle Clarksville Gas & Water grease compliance requirements?
Yes. Clarksville Gas & Water enforces strict grease trap and wastewater regulations. Rooftop grease runoff that reaches the storm system can result in fines. Every installation we do includes proper rooftop grease containment — boxes, trays, and absorbent pads — so you are compliant with both fire code and F.O.G. regulations from day one.
Clarksville Exhaust System Failing? We Build It Right.
Whether you need a fan replacement on Wilma Rudolph Blvd, a complete kitchen build-out near Fort Campbell, or a make-up air retrofit for your APSU-area restaurant, DDAN Hood Cleaning and Repair delivers.
Call Now: (615) 881-6968
